Teac ER-LXRC1000, Инструкция по эксплуатации

Страница: 13 / 40

13
5-8-2. Synchronized playback settings
After selecting files to play on the slave units, select the
file to play on the master unit.
If you select the file to play on the master unit first,
search by ID for the files to play on the slave units.
o
It is not possible to search the slave units using meth-
ods other than ID search. Use the master unit for
other search methods.
5. Basic operation
5-8-3. VR-24 sync
Preparation
1
Use a synchronization cable to connect the
SYNC OUT connector of the LX-1000 to the
VR-24/WX SYNC connector of the VR-24.
The VR-24 will operate as the slave unit.
2
Turn the VR-24 on.
3
Set the VR-24 Synchronization type to “WX
sync”.
4
Turn the LX-1000 on.
5
Use the LX-1000 Sync settings to set “MODE”
to “MASTER” and “SYNC NUMBER” to “2”. Then,
conduct “CHECK CONNECT.”
If there are no connection problems, the
“Syncronization status” will be “OK”.
6
Execute “ADJUST TIME” to set the time used by
the VR-24 to that used by the LX-1000.
The error is ±1 second.