Teac ER-LXRC1000, Инструкция по эксплуатации

Страница: 33 / 40

33
8-6. MISC
DISPLAY DATA
Set the bar meter display unit.
DISPLAY CH
Set the number of channels shown on one screen.
NOTATION
Select what is shown for sampling.
FREQ.: The frequency is shown.
BANDW.: The bandwidth is shown.
o
See “Sampling frequencies and bandwidths” in the
Specifications of the LX-1000 Instructions for Use for
information about the relationship between sam-
pling frequencies and bandwidths.
o Regardless of this setting, the sampling frequency
will be written to the header files of recording data.
LANGUAGE (
言語
)
Select the display language.
日本語
: Japanese wil be used.
ENGLISH: English will be used.
8. Settings
8-6-1. PARAMETER
o
Parameters can be loaded from and saved to SD cards.
LOAD
Load the parameters saved on the SD card.
The 5 most recent parameter files will be shown.
SAVE
Save the parameters to the SD card.
NOTE
To overwrite an existing file, select the file and press the
ENTER button. This saves the settings and returns to the
PARAMETER screen.
INITIALIZE
Initialize the parameter settings.