408-35043
Rev
D
6
of 30
2.2.
Applicator with mechanical feed system
With this applicator (Figure 6), the terminals are fed by the action of the feed cam and a series of rods and
levers that move the feed pawl.
Figure 6: Applicator with mechanical feed system
1
Feed mounting screw (2 places)
7
Fine feed adjustment lock screw (far side)
2
Stroke length adjustment screw
8
Feed pawl pin
3
Stroke pivot
9
Feed pawl holder
4
Stroke length adjustment lock screw
10
Applicator counter set screw
5
Fine feed adjustment screw
11
Applicator counter
6
Stock drag adjustment nuts
12
Spare feed cam storage location
