Instruction Sheet
1
of 26
© 2019 TE Connectivity Ltd. family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-35042
08 APR 19
Rev C
1.
INTRODUCTION
The OCEAN 2.0 side-feed applicators are available with either a mechanical terminal feeder or a pneumatic
terminal feeder assembly. Each style of applicator accepts side-feed strip terminals and applies pre-stripped
wires.
NOTE
Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.
NOTE
This instruction sheet, the exploded-view drawing with the associated parts list packaged with the applicator, along with the
applicable customer manual provide all the information required to operate and maintain the applicator and machine.
Following is a list of the terminating machine customer manuals that apply:
Basic AMP-O-LECTRIC* Machine
Model “T”
Terminating Unit
Model “G”
Machine
AMP 3K* Machines 1725950-[ ] and AMP 5K* Machines 1725900-[ ]
AMP 3K/40* Machines 2119683-[ ] and AMP 5K/40* Machines 2119684-[ ]
NOTE
Refer to Instruction Sheet 408-35005
1
for translations of the Safety Warnings specified herein.
2.
DESCRIPTION
Overview
1. Main components of the mechanical and air feed applicators are identified in Figures 1 and 2,
respectively.
Figure 1
1
Future Release
OCEAN 2.0 Side-Feed Applicators
Mechanical Feed Applicator
Base Plate
Side-Feed Strip-Form
Terminals
Rear Strip Guide Plate
Mechanical Terminal
Feeder Assembly
Mounting Screw (2 Places)
Feed Pawl
Ram Assembly
Applicator Housing
Front Strip Guide Plate
