408-35042
Rev C
21
of 26
4. Depress the Floating Shear, and check for proper shearing action and proper cutoff tab.
5. If necessary, repeat Steps 1 through 4, or check for worn or damaged tooling.
Carrier Strip Cut or No-Cut Setup
The Shear Holder can be set for the carrier strip to be cut or not. If it is set for the cut orientation (Figure 21;
Top Detail), check that the cutting blade is present and in the proper orientation on the Shear Holder.
For the no-cut orientation (Figure 21; Bottom Detail), remove the Carrier Strip Cutting Blade, and mount it to the
storage location on the side of the applicator housing (reference Figure 22).
Figure 21
Figure 22
Setup for Cut Orientation
Setup for No-Cut Orientation