Pocket SuperEASY™
Atterbury Consultants, Inc
.
14
diameter at 16’ (i.e. 4 = 40%, 0 for total height) or as an alpha value for
diameter (i.e. A=1”, B=2”, C=3”, D=4”, etc.).
Bol Ht
– Bole Height (
required for measure plots
): A three digit
numeric field. Bole height is the distance from the stump to the Top
Diameter Fraction or the Top Diameter outside the bark to the nearest
foot.
Tot Ht
- Total Height (
optional
): A three digit numeric field. Total height
is the distance from the stump to the tip of the tree. Maximum tree
height for a species is input on the species screen. Bole height and total
tree height can both be entered. If a “0” (zero) is entered in the TD cell
then the Bol Ht value will be automatically copied to the Tot Ht cell.
Classification
(
optional
)
P
– Position
User defined single digit alpha code (i.e. D=Dominant)
C
– Crown Ratio percent of the tree length with canopy.
User defined single digit numeric code.
V
– Vigor
User defined single digit alpha code.
D
– Damage
User defined single digit alpha code.
T
– other: User defined alpha or numeric code.
Segments
- (
required for volume calculation
) Up to 12 Segments can
be described for each tree.
S
- Sort - A single alpha or numeric code as described in the active
sort/grade table.
G
- Grade - A single alpha or numeric code as described in the active
sort/grade table.
Ln
– Segment length. Two digit numeric. On the final log segment of a
tree, a “- -“ may be entered instead of a numeric length. If a “- -“ is
entered, the program will compute the length of the segment to the
minimum top diameter or to bole height, which ever it hits first. Log
length min and max are defined in the species, sort and grade tables.
F
- Board Foot length deductions.
I
– Board Foot diameter deductions
F
–Cubic Foot length deductions
I
– Cubic Foot diameter deductions
