SETUP
Trigger Curve
This feature allows you select a proper curve
from 6 preset curves to control the relation
between the striking force and changes in
volume. Change the curve until the response
feels as natural as possible.
Rotate the
SCROLL WHEEL
to choose a
curve. The corves you may select are Linear,
Exp1, Exp2, Log1, Log2 and Spline. Press
the
ENTER
button to confirm your setting.
Press the
EXIT
button to exit current opera-
tion and back to Advanced menu. The default
curve is Linear.
Cross Talk
Curve type
Diagram of 4 types of the curve
V
o
lu
m
e
V
o
lu
m
e
V
o
lu
m
e
V
o
lu
m
e
Linear Exp Log Spline
Strength
Strength
Strength
Strength
18
Select Cross Talk in the menu and press
ENTER
. The option "Cross Talk" on screen
will stop blinking, which indicates you have
entered cross talk adjusting mode.
Keep striking a single pad repeatedly with high
velocity ,and the system will eliminate unex-
pected sounds on all other pads.
Go to next pad after no unexpected sound is
heard by other pads. Finish all the cross talk
adjustment and press
EXIT
to finish.
For example, if you can hear sound from pad
B when you are only striking pad A, then there
is cross talk between pad A and pad B.
Enter Cross Talk adjusting mode and keep
striking pad A hard repeatedly until no sound
from pad B is audible. Press
EXIT
to finish
adjustment.
NOTE:
The response from all the pads are bit
slower compared with when playing kits. This
is a normal phenomenon.
Cross Talk
Trigger
Linear Exp1 Exp2 Log1 Log2 Spline
