INSTRUCTION MANUAL
RWS1000B
•
1500B Series
TDKLambda
<Page>
Note
• Take note that traces of sheet metal processing be left in our power supplies.
•
When disposing product, follow disposal laws of each municipality.
•
Published EMI (CE, RE) or immunity is the result when measured in our standard measurement conditions and
might not satisfy specification when mounted and wired inside enduser equipment.
Use the product after sufficiently evaluating at actual enduser equipment.
• When exporting our products, apply for necessary permissions as required by rules and regulations of Foreign Exchange
and Foreign Trade Control Act.
• Catalogue, contents of the instruction manual may be changed without a prior notice. Refer to latest catalogue or
instruction manual.
• Reproduction or reprinting the instruction manual or its portion is forbiddne without our permission.
•
CE Marking
CE Marking, when applied to a product covered by this handbook, indicates compliance with the low voltage
directive.
STORAGE METHOD AND STORAGE PERIOD
• Store in original package
• Prevent excessive vibration, impact and external force from being applied during storage.
• Store in an area out of direct sunlight
• Temperature and humidity should be within range of product specification (with no condensation)
• Storage period should be up to two years from receiving.
3/23
