2
83507013 Rev G
2.12 Supplemental Characteristics ________________________________________________ 32
2.13 Genesys
™ Outline Drawings _______________________________________________ 33
3
INSTALLATION
____________________________________________________________ 34
3.1
General ______________________________________________________________ 34
3.2
Preparation for Use ________________________________________________________ 34
3.3
Initial Inspections __________________________________________________________ 34
3.4
Rack Mounting ____________________________________________________________ 35
3.4.1 To install the Power Supply in a Rack: __________________________________ 35
3.4.2 Rack Mount Slides (optional): _________________________________________ 35
3.5
Location, Mounting and Cooling _______________________________________________ 35
3.6
AC Source Requirements ___________________________________________________ 35
3.7
AC Input Power Connection __________________________________________________ 36
3.7.1 AC Input Connector, 1500W Models ____________________________________ 36
3.7.2 AC Input Connector, 750W Models _____________________________________ 36
3.7.3 AC Input Cord _____________________________________________________ 36
3.7.4 AC Input Wire Connection, 1500W Models _______________________________ 37
3.8
Turn-On Checkout Procedure ________________________________________________ 37
3.8.1 General __________________________________________________________ 37
3.8.2
Prior to Operation __________________________________________________ 38
3.8.3 Constant Voltage Check _____________________________________________ 38
3.8.4
Constant Current Check _____________________________________________ 38
3.8.5
OVP Check _______________________________________________________ 38
3.8.6
UVL Check _______________________________________________________ 39
3.8.7
Foldback Check ___________________________________________________ 39
3.8.8
Address Setting ____________________________________________________ 39
3.8.9
Baud Rate Setting (RS232 and RS485 only) _____________________________ 39
3.9 Connecting the Load _______________________________________________________ 40
3.9.1
Load Wiring _______________________________________________________ 40
3.9.2
Current Carrying Capacity ____________________________________________ 40
3.9.3
Wire Termination ___________________________________________________ 41
3.9.4
Noise and Impedance Effects _________________________________________ 41
3.9.5
Inductive Loads ____________________________________________________ 41
3.9.6
Making the Load Connections _________________________________________ 42
3.9.7
Connecting Single Loads, Local Sensing (default). _________________________ 44
3.9.8
Connecting Single Loads, Remote Sensing ______________________________ 45
3.9.9
Connecting Multiple Loads, Radial Distribution Method _____________________ 45
3.9.10
Multiple Load Connection with Distribution Terminals ______________________ 46
3.9.11
Grounding Outputs ________________________________________________ 46
3.10
Local and Remote Sensing _________________________________________________ 46
3.10.1
Sense wiring _____________________________________________________ 46
3.10.2
Local sensing ____________________________________________________ 47
