TDK-Lambda GENESYS 10KW, Техническое руководство

Страница: 63 / 74

83-530-000 Rev G
60
Re-enable SRQ
Byte 1
1010 0101
Byte 2
xxxx xxxx
None
Re-enable SRQ without reading or
clearing the SEVE Register. xxxx
xxxx is the address of the supply in
binary. Works only in MD Mode.
Print Power On
Time
Byte 1
1010 0110
Byte 2
xxxx xxxx
Power On time
in minutes
Read the time the supply is active
under AC Power. xxxx xxxx is the
address of the supply in binary. Re-
turns a 32 Bit integer as 8 Hex bytes.
A ‘$’ sign is appended to the data
followed by a 2 byte check-sum. A
total of 11 bytes are returned.
Retransmit last
message
110x xxxx
Last message
Retransmit last response from a
command. x xxxx is the address of
the supply in binary.
Acknowledge
SRQ
111x xxxx
None
Acknowledge SRQ. If retransmission
of SRQ is enabled, it will remain en-
abled for the next SRQ. X xxxx is the
address of the supply in binary.
Test if MD Mode
is Installed
Byte 1
1010 1010
Byte 2
xxxx xxxx
0 or 1
Returns a 0 if not installed or a 1 if
installed. A ‘$’ sign followed by a 2
bytes checksum and Carriage Return
is appended to the data. xxxx xxxx is
the address of the supply in binary.
Supply Initiated
Communications
SRQ 100x xxxx
N/A
SRQ from supply when in MD Mode.
X xxxx is the address of the supply in
binary.
Table 7-3. SINGLE BYTE COMMUNICATIONS
Table 7-4: Current programming range
Model Minimum
(A)
Maximum
(A)
7.5-1000 0.0 1000.0
10-1000 0.0 1000.0
12.5-800 0.0 800.0
20-500 0.0 500.0
25-400 0.0 400.0
30-333 0.0 333.0
40-250 0.0 250.0
50-200 0.0 200.0
60-167 0.0 167.0
80-125 0.0 125.0
100-100 0.0 100.0
125-80 0.0 80.0
150-66 0.0 66.0
200-50 0.0 50.0
250-40 0.0 40.0
300-33 0.0 33.0
400-25 0.0 25.0
500-20 0.0 20.0
600-17 0.0 17.0
NOTE: