- 14 -
TDK-Lambda
EZA2500 series
Quick Manual / Basic
Confirm communication
Make sure you can communicate with EZA.
①
Click on the "Main" tab in a state where it can communicate with EZA and display
the main screen.
②
Click on the "READ" switch of “ [10] Converter Meter1” in the lower left.
③
Verify that the values of the sensor for each voltage, current, power, internal
temperature of EZA are displayed on the screen.
When communication with the EZA fails, "Timeout" is
displayed in “Communication status” at the upper right of
the screen.
If the communication fails, please confirm the procedure up
to this point according to this manual again. If it still fails,
please contact our person in charge.
Sensor values include errors. Please check the maximum
error value in the reading accuracy item of the specification
sheet.
①
②
③
