TCSM CE Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 23

Electrostatic Oil Mist Collector CE Series
15
5.2.2 Before starting up
1
5.2.2.1 Please double check the power distributions are
2
tightened well.
3
5.2.2.2 Motor rotation direction:
4
The direction of rotation of the motor must be
5
checked as follows: - Use the hand switch to turn on
6
the machine. - The motor must rotate
7
counterclockwise. - If the direction of rotation is incorrect,
8
have the poles of the mains cable reversed by an electrician.
9
- Furthermore, the safety checks that are specified for each
10
workday must be executed.
11
。
12
5.2.2.3 Operating/Error light:
13
After confirming the rotation of the motor, turn on
14
the main power switch. At this time, the
15
operating/error light may flash. Please confirm
16
whether it is still flashing after 5 minutes. If
17
still flashing, turn off main power switch and take
18
out the
Electrode Plate
. Clean
Electrode Plate
by
19
pressurized air. According to the pressurized air
20
use rules in the cleaning chapter 6.3.1, clean up
21
the large pieces of residual material. After clean
22
up, put it back in the machine, and turn it on
23
again. If there is no flashing, the machine is work
24
properly. If light still flashing, please repeat the
25
cleaning process once again.
26
5.2.3 Starting up
27
After testing start up, machine is ready to run.
28
If there is any situation that cannot be solved, please
29
contact supplier for more assistance.
30
31