TCSM CE Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 23

Electrostatic Oil Mist Collector CE Series
18
6.3 Electrode plate cleaning
1
6.3.1 Manual cleaning
2
Item Icon Instruction
1
Please choose a neutral
detergent with good
degreasing performance and
follow the formula of the
lotion. If you use (strongly
acidic) aluminum lotion,
please pay attention to the
use of aluminum lotion, and
you need to wear protective
equipment before cleaning)
2
Spray the entire
electrostatic plate,
including each plate, with
the detergent. And use a
brush to remove stains, then
rinse repeatedly with
detergent. After cleaning,
spray the detergent full and
let it stand for 10 minutes
until the detergent
dissolves and softens the
dirt.
3
Use 4-5bar high-pressure
water to clean up plate in
parallel way. Avoid hurting
the plates and wash it until
the oil stains are cleaned.
If there is no high-pressure
water, please use a brush in
the previous step to remove
the oil stains on the plate
Dirt
Neutral
Detergen
t
Water
Detergent
Detergent
Electrode
plate
Stand
still
High pressure water cleaning