TCSM CE Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 18 / 23

Electrostatic Oil Mist Collector CE Series
17
6.2 Troubleshooting
1
Before maintenance, the main power supply should be
2
powered off and a padlock should be added. After power off,
3
please wait 10 minutes before performing maintenance.
4
Disturbance
Indicator Possible causes Way to resolve the problem
6.2.1Motor and
Electric field filter
are not activated
after turning on
main switch. 1. Power not connected
or phase loss
2.Circirt braker is
triggered
1. Please double check all switches are opened.
2. Check braker. If braker still trigger after reset
(Figure 2), please contact supplier.
6.2.2Motor does
not
work.(Collector
which use
inverter ) 1.Inverter alarm
2. Inverter broke 1. Please check inverterpane. If no error code
display,check power supply situation. If pane
display error code,plese turn off Collector and turn
on again
2. If error code can not solve,plaese check Shihlin
SE3/SC3 inverter user manual,follow
invertermanual instruction or contect supplier.
6.2.3
Operating/Error
light flashing
1.
Electrode Plate dirty.
2.
Electrode Plate
broke
1. Please confirm whether it is still flashing after turn
on main switch again. If still flashing, turn off
main power switch and take out the Electrode
Plate. If electrode plate is dirty or short with metal
filings. Clean Electrode Plate by pressurized air.
According to the pressurized air use rules in the
cleaning chapter 6.3.1, clean up the large pieces of
residual material.
2. Please check electrode plate, if electrode plate
broke or short, please contact supplier.
6.2.4 CE series oil
mist collector is
inefficient. 1. Electrode occasional
error.
2. Related electronic
parts failure
1.
Follow troubleshooting 6.2.3instruction to solve
electrode error.
2.
Please check operating light. If it isn’t work ,
please check fuse and change open one. In case
Collector is still inefficient, please contact to
supplier.
Figure 2
5
6
7
8
9
10