TBS FPVision - CORE PRO
OSD, UNIFY PRO VTX, VID
SWITCH, BEEPER, DCDC
The TBS FPVision is a new layer for the
POWERCUBE and it is our latest innovation
(released October 2016). It packs a powerful
punch in a small package, it combines the CORE
PRO OSD, DCDC, UNIFY PRO 5G8 VTX, dual
camera/switch and TBS 100A Current Sensor in
one layer and replaces the normal DCDC layer. The current sensor can estimate your battery capacity and
display accurate capacity remaining. The OSD engine was improved to support a variety of advanced display
features, but still builds upon the CORE PRO stack. The TBS FPVision directly replaces the bottom layer (PDB
V1 or V2) in the normal POWERCUBE stack, the Unify Pro VTx and the CORE PRO OSD in your build. The
stacking height or other functionality is not affected.
For instructions on how to use the OSD, please consult the
TBS CORE PRO manual
as this is what is at the
heart of the FPVision board. While for the VTX, check the
TBS UNIFY PRO VTX manual
in more detail.
There are some additional features built into the camera ports of the FPVision that the regular TBS CORE PRO
does not support, which we will explain in the following sections.
RC Calibration - Push button
The TBS FPVision only has a single push button available as an external input. Push it for 5 seconds to enter
the OSD / RC Calibration mode, which you need to perform to provide further control to the TBS FPVision
OSD.
Camera port switch
There are two camera ports on the FPVision. In the OSD configuration menu, you can select which R/C
channel that controls the camera switch. You can also reverse the direction of the channel.
FPV Camera OSD control
Accessing the camera’s OSD menu used to be a big hassle. Now, simply select “FPV CAMERA” menu from the
CORE PRO OSD and you will get to access the camera’s OSD (compatible with TBS ZeroZero V2, HS1177,
Runcam Owl Plus / Swift, etc).
12
