Attention
The TBS POWERCUBE, when installed, can easily damage property or extremities if not used properly. Always
ensure that no propellers are installed when configuring, installing or tuning your multirotor. We also
recommend to use the options “Spin motor when armed” and use stick commands to arm your multirotor,
rather than switches.
NEVER leave the platform powered on and unattended. Always check proper failsafe (power down)
functionality, and try not to break too many laws while flying FPV (TBS can not be held responsible is what we
are saying.)
Only disassemble/reassemble with proper tools! Take extra care to components that are situated around the
standoffs. Check the maintenance section before attempting to open up the PowerCube!
4
