TBS Elite Bundle / External ESC PDB layer
If you prefer, or need to use, your own external ESCs for a customized setup, you can do this by using the
special external ESC board for the POWERCUBE. It allows you to solder 4 ESCs to the board, including the
control signal.
You will need a TBS COLIBRI RACE (FC) and the TBS DCDC PDB or TBS FPVision for a complete working
quadrotor setup.
The installation is simple. The flight control has 4 signal pins (holes) that match to the 4 signal pins on the
PDB. Simply drop the FC and the PDB onto the stack together (no spacers in between!) and then solder each
of the signal pins (holes) together with the PDB on the bottom.
Add ESCs by soldering the ESC power positive/negative and control signal wires to the designated pads on the
board, and then to the ESC. The negative signal lead can be soldered to the negative power pad if desired. In
the case of the TBS BulletProof 25A, the negative signal wire is not needed.
31
