Installation, putting into operation
32
Secure the unit (lock the wheel brake (11)). Always observe the operating regulations at the set-
up location.
The ventilation slots of the bypass (9) and the discharge opening (10) cooling must not be
covered.
Installation of the optional prefilter module
When using AF5 with a prefilter module and a prefilter, the following steps need to be observed for its
installation:
Unmount the cover
Remove the prefilter mat
Install the prefilter module with prefilter
Mount the cover
lose all module fasteners
Figure 4: Connection of the filter and extraction system
Connect the extraction system in the following order:
Plug the extraction hose (3) onto the connection (1) of the filter and extraction system and
secure it with a hose clamp (2).
Plug the interface cable (4) into the 25-pole connector of the filter and extraction system (5).
Plug the power cable (6) into the power supply connector (8) of the filter and extraction system
and into an earthed socket.
