TAVRIDA ELECTRIC VCB Series, Руководство пользователя

Страница: 69 / 142

69
Notes:

the bending radius of the flexible release cable shall be not less than 100 mm;

it is recommended to install ISM in the Switchgear and connect its auxiliary circuits prior interlock
connection to simplify the connection and adjustment process;

if the flexible release cable passes through the Switchgear segregations according to the design solution
it is recommended to pass it through these segregations prior interlock connection.
Figure 122
Unscrew the self-tapping screws of the transparent
cover and remove it.
Installation of ISM15_LD_8, MD_1, MD_3, Shell_2, HD_1 main
contacts position indicator
The installation of the main contacts position indicator is shown below. (Figure 123 - Figure 128). The ISM
shall be in the Closed position.
Notes:

the bending radius of the flexible indication cable shall be not less than 40 mm.
(There are two possibilities (left, right) to connect the flexible indication cable)
Figure 123
Connection of CBkit_PosInd_1 to the ISM