English
Mobile radiator
PRMB 1600 / PRMB 2400
DESCRIPTION
1 Thermostat
2 ON pilot light
3 ON/OFF switch
4 Heating panel
5 Legs with castors
Read these instructions carefully before swit-
ching on the appliance and keep them for future
reference.
Failure to follow and observe these instructions
could lead to an accident and render the guaran-
tee null and void.
INSTALLATION
-Be sure to remove all packaging material.
-In order to prevent possible risk of accidents, do
not leave items such as plastic bags, polystyre-
ne or cables within the reach of children.
-Ensure that the voltage indicated on the rating
label matches the mains voltage.
-If the appliance is to be mounted on a wall, fix it
at a height of at least 25 cm from the floor.
-The power socket must be easily accessible in
order to unplug the appliance quickly in case of
emergency.
-The appliance must only be used with its wall
bracket, supplied with the packaging.
FIXING THE LEGS WITH CASTORS (FIG. 1):
-Put the appliance face down, present the sup-
ports facing the orifices and fix them using the
supplied bolts.
USE:
-The appliance may give off a small amount of
smoke and/ or odour the first time you use it.
This is perfectly normal and will disappear after
a few seconds.
-Fully unroll the appliance’s power cable before
each use.
-Make sure that the appliance is properly assem-
bled.
-Connect the appliance to the mains.
-Set the ON switch in the desired position, after
which the ON pilot light will come on.
PRMB 1600 :
I = 600 W
II = 1000 W
III = 1600 W
PRMB 2400 :
I = 1000 W
II = 1400 W
III = 2400 W
-Rotate the thermostat to select the desired
temperature.
-When the desired temperature is reached, the
apparatus will switch off automatically.
-If temperature in the room drops, the appliance
will switch on again automatically.
CLEANING
-Make sure that the appliance is switched off and
allow it to cool down before undertaking any
cleaning task.
-Never clean the appliance while it is in opera-
tion, or use abrasive products.
-Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
-Never submerge the appliance in water or any
other liquid or place it under running water.
-If the appliance is not completely clean its sur-
face may become degraded, affecting its useful
life, and may beco- me dangerous to use.
-NB: If you switch the appliance on after long
periods of inactivity it may emit a small amount
of smoke. This is perfectly normal and is caused
by the combustion of lef- tover accumulated
dust particles. This phenomenon may be pre-
vented by cleaning the appliance before using it.
