21
•
Clamp the clamping lever (4.3).
•
To avoid damages position a foam (B) or
something similar on the machine pedestal (5).
Take care that the distance between foam (B)
and quick change holder (3.1) is not too large.
•
Put the screws
- Tauro 120 3pcs. DIN912 M6x22
- Taurox 300 / 400 / 900 4 pcs. DIN912 M8x35
with washer (A) through the drilling of the
column flange (4.2).
•
Push the drive unit (3) onto the dowel pin of the
column flange (4.2) and screw one screw down
light.
•
Screw down the screws (A) with a torque of
- 10 Nm (Tauro 120)
- 18 Nm (Taurox 300 / 400 / 900)
•
Remove the foam.
3
3.1
5
A
4.2
B
4.3
Fig.: 3.3
•
Position or install the control unit at a suitable
position that way that the cables are not
exposed soiling’s directly.
Install the control unit vertical with the fixation to
the wall (1.4) on the work bench or a wall.
(Dimension see chapter: „Mechanical
dimensions control unit“)
1.4
1
Fig.: 3.4
•
Fix the articulated bracket (2.16) of the control
unit (2) at the rear side of the drive unit (3) with
two pieces screws (A).
- DIN912 M5x16 (Tauro 120)
- DIN912 M6x22 (Taurox 300 / 400 / 900)
3
2
2.16
A
Fig.: 3.5
