TATU PHT FLEX Скачать руководство пользователя страница 44

Страница: 44 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

Adjustments and operations

• Retighten nuts and bolts after the first day of planting. Check the conditions

of all pins and cotter pins.

• Carefully observe the lubrication intervals.
• The tires inflation must be done with the aid of a contention device (tire inflation

cage).

• The correct inflation of the tires is important to maintain the planting uniformity.

Keep the same inflation for all tires according to the 'tires inflation' page.

• Choose a gear that allows the tractor to maintain certain power reserve,

ensuring against unforeseen efforts.

• Speed is relative to the tractor gear and can only be determined by local

conditions. We adopted an average 5

to 7 km/h

, which is not advisable to

overcome to maintain service efficiency and avoid possible damages to the

equipment.

• Only people who own a complete knowledge of the tractor and equipment

must operate them.

• Be on a wide field and maneuver on slow gear to hitch the equipment, being

ready to brake when necessary.

• When filling the planter, observe its proper hitching to the tractor. Verify if

there is any object inside the hoppers that may cause damage to the metering

devices.

• Always use seeds and fertilizer free from impurities.
• Inspect the seed metering systems twice a day and observe the good

functioning of the fertilizer metering system.

• Keep the equipment leveled.
• Periodically check the established adjustments in the beginning of the

plantation.

• Give special attention to the fertilizer position in the soil, related to the seeds.
• Carefully check the seed depth and the compaction pressure.
• Never make maneuvers or use reverse gear when the rows are touching the

soil.

• Never make sharp turns during the service, especially in a no-till plantation.

The row components may be damaged.

• To make any verification in the equipment, it is necessary to lower it to the

ground and shut down the tractor engine.

• During working and transportation, the presence of passengers on the tractor

or equipment is not allowed.

• For adjustment and verification of the cutting parts (row units) of the equipment,

it is necessary to disconnect the clutches to avoid wastes.

• As previously mentioned, this planter features several adjustments. However,

only the local conditions can determine its best adjustment.

Operations - Important points

Содержание PHT FLEX



























































Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды

TATU PHT FLEX, Руководство оператора

Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды