TATU PHT FLEX Скачать руководство пользователя страница 6

Страница: 6 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

The PHT FLEX planter is simple to operate, requiring however

the basic and essential cautions to its handling.

Always keep in mind that safety requires constant attention,

observation and prudence during plantation, transportation,

maintenance and storage.

To the operator

Working safely

Be careful with the environment

• Security aspects must be carefully observed to avoid

accidents.

• This symbol is a warning used to prevent accidents.
• The instructions near this symbol refers to the safety of the

operator, mechanician or third parties, therefore they should

be carefully read and observed. When the safety instructions

are not being followed, a serious accident or even death may

occur.

Read and understand the information before making any

adjustment or maintenance.

Before activating the equipment, check if there are no people

or animals on the row operation area or over the equipment.

Have extreme caution when operating with the power take-off

(PTO). Do not get closer during operation.

Products such as oil, fuel, filters, batteries and others must not

be spilt over the soil as they can penetrate the underground layers,

thus compromising nature. Ecological and conscious disposal of

them should be done.

Dear operator!
Respect the ecology. Do not throw trash away. This gesture of

goodwill helps to protect our environment.

Содержание PHT FLEX



























































Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды

TATU PHT FLEX, Руководство оператора

Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды