TATU PHT FLEX Скачать руководство пользователя страница 53

Страница: 53 / 58

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PHT FLEX

Planter maintenance

Maintenance

• Lower the equipment before carrying out any adjustment or maintenance service.

• Wash the whole planter using only water.

• Remove the hoses and wash them immediately using water and neutral soap.

• Verify all moving parts of the planter for wearing occurence. If necessary, replace

some parts and leave the planter ready for the next planting season.

• Repair the damaged paintwork.

• Spray the metallic parts with protective oil. Never spray used engine lubricant oil.

• The driving mechanism chains should be removed at the end of the planting season,

cleaned and stored in a recipient with oil until the next planting season.

• Clean and lubricate all grease fittings.

• Replace the missing or damaged safety decals. Marchesan supplies these decals,

upon request and indication of their respective serial numbers. The operator must know

the need and importance to keep the decals in the proper place and in good conditions.

The operator also have to know the need to follow the instructions, as the lack of safety

may increase the risk of accidents.

• After making all repairs and maintenance cares, store the planter in a covered and

dry place.

• Keep the planter properly supported and avoid the direct contact of the disc blades

and tires with the soil.

• After finishing a job, clean up the seed hoppers by removing all the seeds and washing

right after.

• Check if the battery used on the planter is in good conditions.

• Avoid to transport the equipment over the asphalt as this may lead to excessive wear

to the tires.

• Watch carefully the installation and handling position of the planter cables, since

more than half of the maintenance causes are related to that.

Содержание PHT FLEX



























































Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды

TATU PHT FLEX, Руководство оператора

Результаты поиска

Содержание PHT FLEX

Отзывы:

Похожие инструкции для PHT FLEX

Бренды по названию

Популярные бренды