Tatu Marchesan PHP 3, Инструкция по эксплуатации

Страница: 28 / 46

26
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
PHP
Fertilizer distribution
The Fertilizer distribution is made by a auger, and the variation in the amount are
obtained modifying the driving shaft gears {D} and driven shaft {E} .
Adjustments and operations
Procedures to change sprockets
• Remove the cover (A) from the transporting wheel, unscrewing the wing nuts (B)
and flat washers.
• Move the lever (C) to relieve the chain tensioner and lock the lever with the cotter
pin in the provided hole.
• Change sprockets, the driving shaft (D) and the driven shaft (E) removing the lock
pins (F) as required.
• Free the lever releasing the cotter pin.
A
B
D
E
C
F
• On page 28, you can see different amounts of fertilizer distributed
for different spacing according to the sprockets change.
• The Fertilizer distribution tables should be used as a reference to
start adjusting the planter.
• Factors such as the planter tire sliding rate (slippage), working
speed, tire pressure, conditions of the terrain, type of seed, etc.,
can result in values which differ from those indicated in the tables.
It is therefore essential to carry out practical distribution tests, as
shown on page 29.
IMPORTANT