Tatu Marchesan PHP 3, Инструкция по эксплуатации

Страница: 25 / 46

23
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
PHP
• Remove the cover (A) from the arm of the transporting wheel, releasing the wing
nuts (B) and flat washers.
• Move the lever (C) to relieve the chain tensioner and lock the lever with the cotter
pin in the provided hole.
• Change sprockets, the driving
shaft (D) and the driven shaft
(E), removing the elastic pins (F)
according to the requirements.
• Free the lever, releasing the
cotter pin.
Adjustments and operations
The number and size of holes and slots of the seed plates, as well as their thickness,
vary depending on grain size and the desired amount.
The amount of seed per linear meter can be modified by the driving shaft gears {D}
(14, 18, 22, 26, 30, 34, and 38 teeth), and
{E}
driven shaft (14, 18, 22, 26, 30, 34, and 38
teeth).
Procedure to change sprockets
Seed distribution
B
E
F
D
C
A
• You can see on the following pages the different amounts of seeds
distributed for numerous crops, according to the sprockets change.
• The correct adjustment of the discs with the seed used is essentially
importance.
• Never mix seeds of different dimensions.
• The distribution tables of seeds and fertilizer in this manual should
be used as a reference to start regulating the planter. Factors
such as the planter tire sliding rate (slippage), working speed,
tire pressure, conditions of the terrain, type of seed, etc., can
result in values which differ from those indicated in the tables. It
is therefore essential to carry out practical distribution tests, as
shown on page 29.
IMPORTANT