Tatu Marchesan GAT 800, Руководство оператора

Страница: 34 / 72

32
HOISTS - Rev. 07 - Apr/22
4. Couple the arms (I) to the frame (B) using the junction axles (J) and cotter pins.
5. Right after, fasten the wheel arms (K) to the arms and lock with castle nut and cotter
pins. Assemble the hubs (L) to the wheel arms and couple the tires (M) to the hubs.
6. Assemble the hoses to their respective hydraulic cylinders, as shown on the
'hydraulic circuit' page.
7. Also fasten the universal joint (N) using a junction axle (O), castle nut and cotter pin.
5. Assembly
GATG-BR 2.0T assembly
- Always use thread sealing tape to couple the male quick coupler to the hoses.
- During assembly, avoid that the ports touch the soil.
- When finishing to assemble the hydraulic hoses, carry out a general inspection to
check the tightening of all hose ports and if they are properly installed.
- When transporting this model, it is necessary to lock the wheels using pins (P) to
avoid damages to the equipment.
IMPORTANT
N N
B B
I I
K K
L L
M M
O O
P P
J J