Tatu Marchesan GAT 800, Руководство оператора

Страница: 32 / 72

30
HOISTS - Rev. 07 - Apr/22
4. Couple the wheel arm (I) to the frame (B), locking with a castle nut and cotter pin.
5. Then, assemble the hubs (J) to the wheel arm and couple the tires (K) to the hubs.
6. Assemble the hoses to their respective hydraulic cylinders with proper tightening
and avoid that the ports touch the soil.
7. Also fasten the universal joint (L) using a junction axle (M), castle nut and cotter pin.
5. Assembly
GATG-RO assembly
L L
B B
I I
J J
K K
M M
N N
- Always use thread sealing tape to couple the male quick coupler to the hoses.
- During assembly, avoid that the ports touch the soil.
- When finishing to assemble the hydraulic hoses, carry out a general inspection to
check the tightening of all hose ports and if they are properly installed.
- When transporting this model, it is necessary to lock the wheels using pins (N) to
avoid damages to the equipment.
IMPORTANT