Tatsuta Electric Wire & Cable AD-AS-1LDMA, Руководство по эксплуатации

Страница: 7 / 20

5-2 Ground Connection
Be sure to ground for noise prevention.
5-3 Water Leakage Sensor Connection
The structure and configuration of the water leakage sensor (AD-LS Sensor) used for the Water Leakage
Location Detector (AD-AS-1LDMA) are shown in Drawing 4 and Table 1.
* Shapes and functions of each wire vary, so extra care should be taken when connecting it to the detector.
(Refer to Drawing 5.)
Incorrect wiring will result in inaccurate indication of water leakage locations or break alarm output.
* While carrying out wiring, make sure that the power is switched off.
Drawing 4 AD-LS Sensor Structure
Table 1 AD-LS Sensor Configuration
Element Configuration
Braided wire 0.33mm 2 tinned soft copper wire covered with red plastic braided thread
Insulated wire 0.5mm
2
tinned soft copper wire insulated with blue plastic
Resistance wire
φ0.4 resistance wire covered with white plastic braided thread
External braiding White plastic braided thread
LEAKAGE LOCATION DETECTOR
Buzzer Stop Reset
AD-AS-1LDM
① ② ③ ④ ⑤
Power Power
⑥ ⑦ ⑧
B
ra
id
ed
w
ire
In
su
la
te
d
w
ire
R
es
is
ta
nc
e
w
ire
Drawing 5 Terminal Block for Sensor Connection
-3-
Electrode-3
Electrode-2
Electrode-1
External braiding
3.5 ± 0.5mm
Electrode-1
Electrode-3
Electrode-2
External
braiding
AD-AS-1LDMA