background image

<<<Important  Safety  Precautions>>> 

 

Warning 

Failure  to  operate  this  water  leakage  location  detector  in  compliance  with  the
  following  warnings  may  lead  to  fatality,  serious  injury,  fire,  electric  shock,  or
  detector  failure. 

 
 

Precautions! 

 

 

  Strictly  Prohibited!   

 

Never modify or disassemble this detector. 

 

Allow only qualified persons to carry out installation work inspection of this detector. 

 

Do not touch this detector with wet hands. 

 

When performing maintenance on this detector, wipe it with dry rags instead of using organic solvent. 

 

 

 

  Checkpoints!   

 

Check the rated voltage and the detector supply voltage before installation. 

 

When installing and making electrical connections to this detector, follow the instructions in the operation 
manual. 

 

When inspecting and carrying out maintenance on this detector, follow the instructions in the operation manual. 

 

When using control output contacts, check the contact rated load in the operation manual. 

 

 

 

  Do  not  install  the  detector  in  the  following  locations!   

 

Locations easily accessible to the general public 

 

Locations close to sources of vibration, organic gas or strong electromagnetic induction 

 

Locations subject to excessive waste and dust 

 

Locations where there is a possibility of exposure to water, or high temperature and humidity   

Warranty 

Before shipping, this product is subjected to strict quality control and inspection. In the event of spontaneous failure 
resulting from defective manufacturing, we will repair or replace it according to the following provisions. 

 

Warranty  Provisions 

1.  Warranty period (one year after the delivery date of the product) 

 

Should the product fail during the warranty period under normal usage according to the operation manual, we 
will repair or replace it free of charge. Please contact us using the contact information given below. 

2.  Cases not covered by the warranty 

(1) After the period of warranty 
(2) Failures due to incorrect usage, and unauthorized repairs and modifications 
(3) Failures or damages due to moving, dropping etc. after purchase 
(4) Failures or damages due to fire and natural disasters 
(5) Failures not attributable to this product 
(6) Fees for on-site service (visiting fee and technical fee) 

 
 
 
 
 
 

Содержание AD-AS-1LDMA





















Отзывы: