Tate
Premier SX, Руководство пользователя

Страница: 21 / 32

PREMIER SX INSTALLATION MANUAL.
Approved Document No: GLT.MAN-101T
PAGE 5
Issue : 1.6s Authorised: GH Date: 06/11/2002
An End of Line diode (provided in the Panel) must be connected across the terminals of the last
device on each circuit to allow the wiring to be monitored. It is polarity sensitive, and connected
cathode (STRIPE) to +ve
Detector bases with integral continuity diodes must be used to ensure Manual Call Points remain
operational when a detector head is removed from its base.
Manual call points with integral resistors must be used to prevent a short circuit fault occurring
instead of a Fire Condition when activated.
For more specific device wiring information, please refer to the manufacturers’ own instructions.
The wiring for each Detector circuit should be connected to the relevant termination block on the
Main Control PCB and their screens terminated at the Panel’s base earth tag (see page 9 for more
precise second fix connection details).
2.4 SOUNDER CIRCUIT WIRING
61'
61'
6281'(5 6281'(5 6281'(5 6281'(5
.
(QG RI
/LQH 5HVLVWRU
Note: If non-polarised alarm devices (eg some types of old mechanical bell) are used, then a diode
will have to be placed in line with the device to enable fault monitoring.
61'
61'
%(//
.
(QG RI
/LQH 5HVLVWRU
%(// %(// %(//
&211(&725
%/2&.
2.5 AUXILIARY INPUT WIRING
One non-latching auxiliary input connection is available on the Fire Alarm Panel.
Class Change Input (CC): Operates the Sounders continuously when the CC terminals are shorted
together. If the class change is triggered, it WILL NOT operate the Auxiliary Fire outputs.
Typical auxiliary input wiring options
&/$66
&+$1*(
QG)LUH$ODUP
$8; ),5( 5(/$<
&0 12
&/$66
&+$1*(