background image

74

SAFETY CHECKS

STARTING & DRIVING

06

SAFETY CHECKS

W i n d s h i e l d / w i p e r / w i n d s h i e l d
washer

Always keep windshield glass clean
to avoid any distortion in visibility.
Ensure proper working of wipers and
condition of wiper blade. Ensure that
windshield washer reservoir is full. Do
not operate wiper alone when the
windshield glass is dry, this would
damage the windshield and wiper
blades.

Headlights

Keep headlight lenses clean. Check
for operation of headlamps in both high/
low beam condition. Check for correct
focusing of headlamps. Use only
recommended type of bulbs. Do not
use the high beam unless it is
necessary, as its dazzle may blind  the
driver of an oncoming vehicle, thus
causing an accident.

Side indicators / Hazard warning

Ensure that all side indicators/
hazard warning lights are always in
working condition and they are used
when required.

Horn

Ensure the horn is working properly.
Horn provides safety to other road
users by alerting your presence.

Brakes

Ensure brakes are working properly.
Check brake fluid level in reservoir. Do
not drive the vehicle when brake
warning lamp is 'ON'.

Tyres

Check the condition of tyres for
abnormal  wear.  Maintain correct
tyre pressure, it is very important
particularly when subjected to extreme
conditions, such as high speed, high
load and high outside temperature. Do
not use worn or bald tyres, especially
on the front wheels.

First Aid Kit

A first aid kit is provided in your vehicle.
This is for use in case of minor injuries.
It should be regularly checked and
updated.

Documents

Always carry vehicle registration papers,
insurance, valid PUC certificate and
driving licence with you.

Содержание Zest







































































































































































Отзывы: