TATA Motors Zest Скачать руководство пользователя страница 11

Страница: 11 / 166

SAFETY

SEAT BELTS

How to use seat belts:

1. Pull the belt tongue across your

body and insert it into the buckle.

2. Check and ensure that the belt is

not twisted.

3. Position the lap portion of the belt

as low as possible across your hip
bone.

4. Pull up the shoulder part of the belt

to remove the slack. Make sure that
the belt goes over your collar bones
and across chest.

5. To unlatch the belt, press the red

button on the buckle. Guide the belt
to the pillar as it retracts.

WARNING

1. The belts are intended for adult

occupants only.

2. Each belt should be used by one

occupant only. The belt must not
be put round a child, seated on
passengers lap.

3. Use approved child restraint

system for children

4. If the belt was in use in a serious

accident or shows signs of severe
fraying / damage or of having been
cut, replace it with an approved
belt kit.

5. The belt must not be altered or

modified during use and if required
to be replaced, then it should be
replaced, by

TATA MOTORS

Authorized Service Centre only.

LATCH

UNLATCH

1. Buckle 2.Tongue 3.Press Button

Содержание Zest







































































































































































Результаты поиска

Содержание Zest

Отзывы:

Похожие инструкции для Zest

Бренды по названию

Популярные бренды

TATA Motors Zest, Руководство пользователя

Результаты поиска

Содержание Zest

Отзывы:

Похожие инструкции для Zest

Бренды по названию

Популярные бренды