TATA Motors Zest, Руководство пользователя

Страница: 112 / 166

112
BULB REPLACEMENT EMERGENCY & BREAK DOWN ASSISTANCE
07
BULB REPLACEMENT :
WARNING
•
The engine should not be running
when changing bulbs.
•
If the engine has been running just
prior to replacing bulbs in the head-
light housing, please keep in mind
that components in the engine
compartment will be hot.
Your vehicle’s headlamps have
replaceable halogen bulbs. Headlamp
bulbs can be replaced without even
disturbing or removing the entire head-
lamp unit.
WARNING
It is dangerous if a halogen bulb
breaks. These bulbs contain pres-
surized gas and if broken, will ex-
plode causing serious injury by the
flying glass. Halogen bulbs can
break if the glass portion is touched
with bare hands, body oil could
cause the bulb to heat unevenly and
explode when lit. Never touch the
glass portion of the bulb with your
bare hands and always wear eye
protection when handling or working
around halogen bulbs. Always keep
halogen bulbs out of the reach of
children.
Location of the head lamp bulbs :
1. Low beam lamp
2. High beam lamp / Parking /
Position lamp
3. Turn indicator lamp
Replacing the low beam bulb
(halogen lamp):
•
Lift the bonnet to access the bulbs.
•
Remove the dust cover by simply
pulling it off.
(Fig. 1)
•
Pull the connectors from the bulb.
(Fig. 2)
•
To free the headlamp bulb from the
socket, press and swing the retain-
ing spring and pull it straight back.
(Fig. 3)
•
Pull out the bulb from the socket.
(Fig. 4)
•
Insert the new bulb (without touch-
ing the glass) into the socket.
•
Move the retaining spring up and
push it slightly until it lock
properly.
(Fig. 5)
•
Press the connector into the bulb.
•
Press the dust cap on headlamp
housing until it fits properly.
1
2
3