TATA Motors Punch 2021, Руководство пользователя

Страница: 161 / 238

Assemble the Jack handle and wheel
spanner (as shown in fig.)
Position the jack vertically and raise it by
turning the jack handle clockwise until the
jack sits completely on the specified point
and the base of the jack lies evenly on the
ground.
The jack up points are indicated by cutouts
on the front and rear.
Jacking Point Location On Vehicle
Front Jacking location
Rear Jacking location
Continue to raise the jack slowly and
smoothly until the tyre clears the ground.
Do not raise the vehicle more than re-
quired.
Use the jack on level, hard ground. •
Avoid changing the wheel on uphill
and downhill slopes. Chock the
wheels, if the deflated wheel needs
to be changed on slope /ghat area.
If possible, bring the front wheels in •
to the straight-ahead position.
Secure the vehicle against rolling •
away.
Set the parking brake firmly and •
shift into “R” (Reverse gear) on level
ground and while vehicle is in down-
hill position.
When the vehicle is in uphill posi- •
tion, shift the gear in first gear.
WARNING
If you do not position the jack correctly
at the appropriate jacking point of the
vehicle, the jack could tip over with the
vehicle raised. There is a risk of injury.
Also jack can be damaged.
EMERGENCY AND BREAKDOWN ASSISTANCE
153