TATA Motors Punch 2021, Руководство пользователя

Страница: 131 / 238

REVERSE GEAR
To engage reverse gear, shift to reverse
position as shown on the gear lever knob.
DRIVING
Climbing Sharp Gradients On Loose
Surfaces
Start off smoothly in a suitable gear. Accel-
erate smoothly so that there is no loss of
traction by over-revving of the engine.
Choose a smooth slope and select the ap-
propriate gear so that gear changing in the
middle of the climb is not required.
Changing gears in the middle of the climb
can cause loss of momentum and engine
stalling. Shifting to lower gear has to be
done cautiously to avoid loss of traction.
Under no conditions should the vehicle be
moved diagonally across a hill. The dan-
ger is in loss of traction and side-ways slip-
page, possibly resulting in toppling over. If
unavoidable, choose a mild angle and
keep the vehicle moving.
If the tyres start to slip within few feet at
the end of the climb, keep the vehicle sta-
ble by steering left and right. It gives in-
creased grip to the tyres.
If the vehicle stalls or losses headway
while climbing a steep hill, make a quick
Authorized Dealer/Service Center.
Press the clutch fully when gear •
shifting. The reverse gear should be
engaged only when the vehicle is
stationary.
Use the clutch only to shift gears •
and do not use it when vehicle is
stationary on a slope, as the car will
roll down due to gravity.
If all doors are closed when the ve- •
hicle is in ACC/IGN/RUN mode and
if PEPS does not detect the smart
key inside the car, then an audio
warning is given.
Do not rest your hand on the shift •
lever during driving; Pressure trans-
mitted from your hand may result in
premature wear of the transaxle in-
ternal gear shift mechanism
STARTING AND DRIVING
123