TATA Motors INDICA VISTA, Руководство пользователя

Страница: 49 / 162

49
INSTRUMENTS & CONTROLS INSTRUMENT CLUSTER (VISTA TECH)
03
The Average Fuel Consumption data can be reset manually
through “Set” switch provided in the cluster
After resetting the Average fuel consumption the display
will indicate 0.0 and then will show a new average fuel
consumption value after driving for some distance.
If previous data exist DIS will update the display once engine
speed is >0rpm.
Display Range: 0.0 to 99.9 (km/l or l/100km)
Resolution: 0.1 (km/l or l/100km)
Refer to “Switch Function”.
Distance to Empty (DTE):
This feature shows the estimated distance user can drive
with the remaining fuel in the tank. The value is calculated
based on fuel economy user have achieved over few hundred
kilometres or miles.
DIS displays actual DTE at every Ignition on cycle.
DTE is calculating using a running average fuel economy
which is based on recent driving history for few hundred
km. This running average fuel economy value is not same
as average fuel economy display.
This value tends to vary with change in drive pattern, vehicle
speed, Traffic condition and different road conditions.
Display Range: 0 to 999 km
Resolution: 1 km
NOTICE
To get actual DTE value after fuel filling customer has do
the ignition OFF to ON
Whenever battery terminals are removed, units return to
default factory setting. (All data’s will get reset). Again it
shows the data on display after some distance travelled
and data’s will get stabilized after some few km depending
upon the driving pattern.