TATA Motors INDICA VISTA, Руководство пользователя

Страница: 134 / 162

134
FUEL SPECIFICATION TECHNICAL INFORMATION
09
FUEL (PETROL) :
Unleaded regular grade petrol conforming to IS2796-1994/
DIN 51607 (or equivalent) and RON not less than 91(BSIV)/
RON not less than 87 (BS-III) is recommended to beused
as fuel. It is always recommended to use correctfuel to get
optimum emission performance.
NOTE
Always use petrol of a correct specification in a vehicle
fitted with catalytic convereter. Even single fill of
leadedpetrol will seriously damage the catalytic converter.
LUBRICANTS :
Engine oil : Recommended grade of engine oil confirming
to SAE 15W40 API-CH-4 + MB 228.3 specification and
range of ambient temperature at which these can be used
are given in the table below :
Ambient temp. in deg.C Engine oil grade
-10 deg. & above SAE 20W/40 or SAE 20W/50
-15 deg. to 40 deg. SAE 15W/40 or SAE 15W/50
-20 deg. to 40 deg. SAE 10W/40 or SAE 10W/50
-35 deg. to 40 deg. SAE 5W/30
Brand names : As per chart given in the manual.
Transaxle : Use recommended brand of 80W API GL-4 gear
oil (MPFI) and Semi-synthetic SAE 75W85 (Quadrajet).
Grease for axle bearings : Lithium base grease IPOL IPLEX
LC Grease 2
Brake fluid : SAE J 1703, DOT 3
Power Steering : ATF Dextron III - 210
COOLANTS :
Presence of dirt in coolant chokes up passages in radiator,
cylinder head and crankcase, thereby causing overheating of
engine.
To prevent rust formation and freezing of coolant inside the
passages of radiator, crankcase and cylinder head use
premixed coolant as recommended. It is recommended that
the entire cooling system should be drained and filled with
fresh premixed coolant.
Engine coolant antifreeze coolant as per class II, JIS K2234
Windscreen Washer Antifrost
Make - Antifrost- K
Concentration - 1 : 5 For 0
0
C
1 : 1 For 10 0 C
2 : 5 For 16
0
C
1 : 0 For 37
0
C
NOTE : We strongly recommend to refill your car’s engine
coolant only at a TATA Authorised service centre.