TATA Motors INDICA VISTA, Руководство пользователя

Страница: 98 / 162

98
JUMP LEAD STARTING EMERGENCY & BREAK DOWN ASSISTANCE
07
•
Then reinstall the wheel nuts and
tighten them as much as you can
by hand.
NOTE
•
Before using the jack, please read
the instructions on the sticker
provided on the jack.
•
Lower the jack completely then
tighten the wheel nuts one by one
using wheel spanner.
•
Press fit the wheel cover back (if
fitted).
•
Restore all the tools and jack at
their respective location.
•
Place the flat tyre at spare wheel
location as described.
NOTE
Check and correct the tyre pressure
and nut tightness of the changed
wheel as per recommendation at
nearest service station. Get the flat
tyre repaired at the earliest.
JUMP LEAD STARTING :
The engine with a discharged battery
can be started by transferring
electrical power from the battery of
another vehicle.
This may be dangerous as any
deviation from the following instructions
could lead to personal injury resulting
from any battery explosion, as well as
damage to the electrical systems in
both vehicles.
WARNING
Do not allow battery electrolyte to
come in contact with eyes, skin,
fabrics or painted surfaces. The
electrolyte contains sulphuric acid
which can cause injury and severe
damage. Wear rubber gloves to
avoid risk of contact.
Connecting procedure:
The engine can be started with another
vehicle battery using jumper cables:
•
Use a vehicle which has batteries
of the same capacity and voltage
(12 Volts).
•
Turn off all electrical loads; check
vehicle so that they are not touch-
ing each other and are in neutral.
•
Connect the discharged batteries
by using the cable for inter connec-
tion.