TATA Motors INDICA VISTA, Руководство пользователя

Страница: 125 / 162

125
TYRES MAINTENANCE & SERVICING
08
For correct tyre pressure, please
refer to sticker on right hand side
“B” pillar below the chassis
number.
NOTE
•
If you notice bumps or bulges in
the tread or the side of the tyre,
replace the tyre.
•
If there are cuts, splits or cracks
in the side of the tyre, replace the
tyre.
•
Replace tyre if excessive tread
wear or non uniform tyre wear is
noticed.
Repairing a Tyre :
Mark the tyre position suitably (if
original colour dot mark is not visible)
with respect to valve stem hole to
ensure that the tyre is refitted in the
original location on the wheel rim.
Ensure that balancing weights are not
disturbed during removal of tyres.
Check the balance weight prior to the
removal of the tyre. If found loose, mark
its location on the rim and refit properly.
Balance the wheel after every
dismantling and assembly of tyre on
the wheel rim.
While fitting wheels on the vehicle
ensure that wheel pins are free from
dust, scratches, dirt, dents, etc.
NOTE
Do not apply any oil on the wheel
pins. Wipe off the oil if present.
Special care for tubeless tyres :
1. While removing tyre from wheel rim
and mounting it back on wheel rim,
take precautions not to damage
tyre bead. Use tyre removal and
assembly machines. Damage or
cut on tyre bead may cause
gradual loss of air and deflation of
tyre.
2. Do not scratch inside of tubeless
tyre with metallic or sharp object.
Tubeless tyres are coated with
impermeable layer of rubber from
inside which holds the air inside
the tyre. Removal of this layer due
to scratching may cause gradual
loss of air and deflation.
3. If wheel rim gets damaged in
service, get the wheel rim repaired/
replaced immediately. Running the
vehicle with damaged rim may
cause deflation of tyre and
subsequent dislodging of tyre from
rim.
4. Maintain recommended inflation
pressure. Over-inflation, in
particular, may cause puncture or
bursting of tyre.
NOTE
Life and wear pattern of tyres
depends on various parameters like
tyre pressure, wheel alignment,
wheel balancing, tyre rotation, etc.