TATA Motors INDICA VISTA, Руководство пользователя

Страница: 83 / 162

83
GOOD DRIVING PRACTICES & RUNNING IN STARTING & DRIVING
06
GOOD DRIVING PRACTICES:
• Gear shifting should be gradual ac-
cording to varying speeds. Avoid
rapid acceleration and prolonged
high speed running of the engine
while using the new vehicle for the
first 1500-1800 km of operation.
• Slow down before shifting to a lower
gear. This will help for avoiding rev-
ving of the engine causing damage.
• Avoid frequent brake application
which can cause overheating of
brakes.
• Slower the vehicle speed while trav-
elling in cross winds. This gives
much better control over the vehi-
cle.
• Avoid high speed when cornering
or turning.
• Make sure that vehicle is com-
pletely stationary before you at-
tempt to shift in reverse gear. This
will avoid damage to the transaxle.
• Drive slowly on wet roads. Wet
roads reduce vehicle traction and
affect your ability to stop and ac-
celerate.
When the vehicle leaves the roadway,
do not steer sharply. Slow down
slightly before pulling back into the
travel lanes.
RUNNING-IN PERIOD :
Avoid rapid acceleration and prolonged
high speed running of the engine while
using the new vehicle for the first 1500-
1800 km of operation.
Do not exceed the following road
speeds during running in period.
Gear (kmph)
TDi Quadrajet Safire CR4
1st 20 20 20 20
2nd 30 30 30 40
3rd 50 50 50 50
4th 80 80 80 80
5th 90 90 90 90
Before you shift to reverse gear, bring
your vehicle to a complete stop and
depress the clutch pedal fully.
Do not shift into reverse gear when the
vehicle is moving forward.
While shifting the gears, it is
recommended to shift at the speeds
given in the table.
You can get extra braking from the
engine when slowing down by shifting
to a lower gear.
This can help you to maintain a safe
speed and prevent your brakes from
overheating while going down a steep
hill.
NOTE
Avoid excessive revving up of engine
rpm.
Idling the engine for long duration
must be avoided.