TATA Motors HARRIER, Руководство пользователя

Страница: 233 / 267

MAINTENANCE
223
Vehicle Parking for Long Duration
(Non - Use Maintenance)
If you want to park your vehicle at one
place for long duration, following care is
to be taken:
1.
Park the vehicle in covered, dry and
if possible well-ventilated premises.
Engage a gear.
2.
Remove the battery terminal cables
(first remove the cable from the neg-
ative terminal). Ensure that battery is
fully charged.
3.
Block the wheel or engage in the
gear mode.
4.
Clean and protect the painted parts
using protective wax.
5.
Clean and protect the shiny metal
parts using commercially available
special compounds.
6.
Sprinkle talcum powder on the rub-
ber windscreen wiper and lift them
off the glass.
7.
Wiper blade lifting sequence during
cleaning / replacing, first lift front
passenger side wiper blade, then
driver side blade.
8.
Slightly open the windows.
9.
Cover the vehicle with a cloth or per-
forated plastic sheet. Do not use
sheets of imperforated plastic as
they do not allow moisture on the ve-
hicle body to evaporate.
10.
Inflate the tyres to
0.5
bar above the
normal specified pressure and check
it at regular intervals.
11.
Check the battery charge every six
weeks.
12.
Do not drain the engine cooling sys-
tem.
Exhaust After Treatment System
Exhaust after treatment consists of be-
low components:
1.
Diesel Oxidation Catalyst (DOC)
2.
Diesel Particulate Filter (DPF)
3.
Selective Catalyst Reduction (SCR)
4.
Various Sensors and Actuators.
The exhaust gas coming from the engine
first passes through the DOC and then
through DPF.
DPF is a filter, which filters carbon soot
in the exhaust gas. DOC and DPF con-
tains precious metals which converts hy-
drocarbons, carbon monoxide etc. in the
exhaust gas to harmless constituents.
Additionally DPF also removes most of
the carbon soot particles in the exhaust
gas. The collected carbon soot in the
DPF is regenerated to clean the filter.