TATA Motors HARRIER, Руководство пользователя

Страница: 160 / 267

STARTING AND DRIVING
150
Starting and Stopping
(PEPS)
(If available)
Engine Passive Start/Stop
Start/Stop switch is provided on the
dashboard towards the right side of
steering wheel.
Start / Stop Switch
A Start Stop Switch (SSSW) or Push to
Start Button is a main component of Pas-
sive (Engine) Start and Stop system. It is
used to control ACC, IGN outputs as well
as to start and stop the engine.
NOTE

If Smart key is inside the vehicle
and on pressing start stop
switch, if start stop switch green
LED blink for
10
sec. duration
then rotate steering wheel and
simultaneously press start stop
switch again.

If smart key is inside the vehicle
and on pressing start stop
switch, if start stop switch green
LED blinks more than
10
sec. du-
ration then contact authorized
TATA MOTORS dealer.

If ESCL (Electronic Column Steer-
ing Lock) is not unlocked
properly, then vehicle doesn’t go
into ACC mode.
Backup Start
If smart key battery voltage is low or
empty and vehicle is in OFF mode then
to start the engine user needs to press
start/stop button two times with interval
of
2.5
sec. between two switch press af-
ter pressing the clutch pedal OR brake
with valid smart key near Immobilizer an-
tenna (located below front cup holder).
Emergency Start
If vehicle engine is switched from ON to
OFF and Start Stop button is pressed
with clutch press within
5
sec, Engine
gets cranked.
NOTE
If ESCL (Electronic Column Steer-
ing Lock) is not unlocked properly,
then Engine will not get cranked.