TATA Motors HARRIER, Руководство пользователя

Страница: 186 / 267

EMERGENCY AND BREAKDOWN ASSISTANCE
176
Spare Wheel Fitment Process

Engage the holding brackets in spare
wheel.

Insert the spare wheel removal span-
ner and rotate clockwise to lift the
spare wheel.

Tighten the bolt until you heard the
‘Tak’ noise. Do not overtight.
NOTE
While stowing the spare wheel, en-
sure that winch bracket is properly
engaged in wheel slot.
Hazard Warning Switch
Press the hazard warning switch to acti-
vate the hazard warning. All the turn sig-
nal lamps will flash simultaneously. To
turn OFF, press the switch again.
Use the hazard warning to warn the traf-
fic during emergency parking or when
your vehicle could become a traffic haz-
ard.
NOTE
The hazard warning lamps can op-
erate even if the ignition is
switched off.
In Case of Flat Tyre

Reduce vehicle speed gradually,
Avoid sudden steering movement or
braking.

Pay attention to the traffic conditions
as you do so.

Switch on the hazard warning lamps.

Stop the vehicle on solid, non-slip-
pery and level ground, as far away as
possible from traffic.

Use the Jack on level, hard ground.
Avoid changing the wheel on uphill
and downhill slopes. Chock the
wheels, if the deflated wheel needs
to be changed on slope / ghat area.

If possible, bring the front wheels into
the straight-ahead position.

Secure the vehicle against rolling
away.

Set the parking brake firmly and shift
into “R” (Reverse) gear on level
ground and while vehicle is in down-
hill position.

When the vehicle is in uphill position,
shift the gear in first gear.