TATA Motors HARRIER, Руководство пользователя

Страница: 130 / 267

CLIMATE CONTROL
120
3. Air Distribution (Mode) Switch
In AUTO mode, the FATC sys-
tem will regulate the mode
automatically. However, user
override is possible with the
use of MODE button to select the desired
airflow mode.
Each time you press the MODE button,
the display shows the mode selected.
Directs air through the cen-
ter and side air vents
Directs air through the cen-
ter, side and foot well vents
Directs air through the foot
well air vents
Directs air through the de-
froster & foot well vents
(Default fresh air mode)
Directs air through the de-
froster vents (Default fresh
air mode)
4. Blower Speed Control Down
Switch (Low)
Press the Blower Speed con-
trol down button to decrease
the blower speed.
5. Blower Speed Control Up Switch
(High)
Press the Blower Speed con-
trol up button to increase the
blower speed.
NOTE
In ‘AUTO’ mode, the FATC system
will regulate the blower speed au-
tomatically.
6.
Temperature Control Knob
Turning the temperature control knob
clockwise increases the temperature of
the air. The desired temperature will be
increased by steps of
0.5
ºC. User can se-
lect temperature range from
18
ºC to
30
ºC. Whereas the anticlockwise direc-
tion decreases the temperature.
When you set the temperature to its
lower limit (Lo) or its upper limit (Hi), the
system runs at full cooling or heating
only. It doesn’t regulate the interior tem-
perature.
7.
Auto ON Selection Switch
To put the automatic climate control in
fully automatic mode:
i. Press the ‘AUTO’ button.
ii. Set the desired temperature by turn-
ing temperature control knob. The
display will show all the functions
during ‘AUTO’ mode.
iii.
The system automatically selects the
proper mix of conditioned and / or