TATA Motors HARRIER, Руководство пользователя

Страница: 217 / 267

MAINTENANCE
207

Do not operate washer motor with
no fluid in washer tank, washer
motor will be damaged.
For location of Windshield Washer
Container and filling cap, please refer
respective Engine Compartment.
Battery

To access battery terminals, remove
the cover by removing the
5
knobs.

Examine the battery for electrolyte
level against the marking on the bat-
tery outer case.

Examine the battery terminals for
corrosion (a white or yellowish pow-
der). To remove it, wash the termi-
nals with a solution of baking soda. It
will bubble up and turn brown.

When this stops, wash it off with
plain water. Dry off the battery with a
cloth or paper towel.

Apply petroleum jelly to the terminals
to prevent further corrosion.

Use a proper wrench to loosen and
remove cables from the terminals.

Always disconnect the negative (-ve)
cable first and reconnect it last.

If your vehicle is equipped with Bat-
tery Sensor, then disconnect only the
Sensor Output Cable. Do not remove
the Sensor, Sensor connector com-
pletely as this will result into Sensor
function loss temporarily. Sensor
functionality will be restored when
the Vehicle is parked for 3-4 hours
without any operation.

Clean the battery terminals with a
terminal cleaning tool or wire brush.

Reconnect and tighten the cables,
coat the terminals with petroleum
jelly.