TASKalfa 306ci, Руководство по эксплуатации

Страница: 390 / 455

10-39
Troubleshooting > Adjustment/Maintenance
2
Adjust the tone curve.
1
Select [ Start ]. A pattern is printed.
Check that the number "1" is printed at the bottom of the pattern.
2
As shown in the illustration, place the printed side down on the platen with the edge with
the arrows toward the back.
3
Select [ Start ]. The pattern is read and adjustment begins.
The second pattern is output.
4
Check that the number "2" is printed at the bottom of the pattern and repeat steps 2 to 3
twice to read patterns 2 and 3 in sequence.
5
Select [ OK ] in the adjustment end confirmation screen.
Drum Refresh
Remove image blur and white dots from the printout.
1
Display the screen.
[ System Menu/Counter ] key > [ Adjustment/Maintenance ] > [ Drum Refresh ]
2
Perform the drum refresh.
Select [ Start ]. "Drum Refresh" begins.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.