TASKalfa 306ci, Руководство по эксплуатации

Страница: 372 / 455

10-21
Troubleshooting > Troubleshooting
C
Message Checkpoints Corrective Actions
Reference
Page
Calibrating… — The machine is under the
adjustment to maintain its quality.
Please wait. page 10-40
Cannot connect to
Authentication Server.
*1
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-41)
— Set machine time to match the
server's time. page 2-23
— Check the domain name. page 9-2
— Check the host name. page 9-2
— Check the connection status with
the server. —
Cannot duplex print on
the following paper.
*1
Did you select a paper size/type
that cannot be duplex printed? Select [ Paper Selection ] to select
the available paper. Select
[
Continue ] to print without using
Duplex function.
page 6-27
Cannot print the
specified number of
copies.
*1
— Only one copy is available. Select
[
Continue ] to continue printing.
Select [ Cancel ] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Uncheck [ RAM Disk ] in the
[ Device Settings ] tab of the
printer's properties.
NOTE
If you unchecked the [ RAM Disk ],
check the [ RAM Disk ] again after
the printing is completed. If not,
print speed may be reduced.
—
Cannot process this
job.
*1
― This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [
End ].
―
Cannot staple the
following paper. Did you select a paper size/type
that cannot be stapled? Select [ Paper Selection ] to select
the available paper. Select
[
Continue ] to print without using
Staple function.
―
Cannot use Staple due
to a failure. ― Contact your Service
Representative. ―
Cassette # failure. ― Contact your Service
Representative. ―
Cleaning the laser
scanner… — The machine is under the
adjustment to maintain its quality.
Please wait. ―