Task Force 227684, Инструкция по эксплуатации

Страница: 11 / 19

Connecting to the Motor/Blade Control Assembly
Connect the plug to the extension cord fully inserting the plug into the mower. The mower is
equipped with a polarized AC power plug (one blade of the plug is wider than the other), which will fit
into the plug on the extension cord only one way. If unable to make a full connection, try reversing
the plug on the extension cord. If the plugs fail to fit, contact a qualified service technician.
Connecting to the Electric Power Source
WARNING:
This mower should be operated on a 15 A circuit. If you experience
difficulty starting on a standard 15 A fuse or circuit breaker, contact a qualified service
technician. Do not use a higher rated fuse or breaker without consulting your power
company.
Plug the extension cord into any convenient 120 VAC 60 Hz outlet or receptacle for your source of
power. This outlet may be located either outdoors or indoors. To avoid blowing fuses, pick an outlet
that is not overloaded. Do not use oversized fuses without consulting an electrician.
T = Obstacles
Outlet (Start here)
Switch use
NOTE: The wheels on mower are set to a low-cutting position for shipping purposes. For best
results, raise the cutting position until you determine the height best suited for your lawn. See
cutting height adjustment in
“
Making Adjustments
”
Fig. 5
Upper handle
Switch
This mower is equipped with a safety switch. To operate the switch, insert your finger into the opening
and push the lever out so that you can grasp it with your other hand. Pull the lever back to turn the unit
on and hold it against the mower handle to keep it running. To turn the mower off, just release the
lever.
WARNING:
The blade continues to rotate for a few seconds after the motor is shut off. If
motor does not come to a stop when the motor/blade control handle is released, contact an
authorized service dealer.
11