Task Force 227684, Инструкция по эксплуатации, Страница: 15 / 19

•
Lubricate the springs on the rear discharge door with light oil.
•
Lubricate the height adjustment levers and related hardware with light oil.
•
Remove the wheels and lubricate the surface of the axle bolt and the inner surface of the wheel
with light oil.
•
Remove the blade and blade hub assembly and lubricate the motor shaft with light oil or engine oil
(see Fig. 8).
STORAGE
The following steps should be taken to prepare the lawn mower for storage.
•
Make certain the power supply is disconnected.
•
Clean mower as instructed in previous section.
•
Inspect and replace/sharpen blade, if required. Refer to the Maintenance section.
•
Lubricate the mower. Refer to Maintenance section.
•
Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer and
rock salt.
•
Wipe extension cord to remove any foreign substance such as oil or stains. Replace extension
cord if cut or damaged in any way.
•
Wind cord in a series of equal loops to prevent it from tangling.
•
Store mower indoors in a cool, dry place, out of the reach of children. Do not cover lawn mower
with a solid plastic sheet. Plastic covering trap moisture around the mower causing rust and
corrosion.
The handle may be folded away completely for storage.
•
Loosen the hand knobs on the sides of the handle, and fold the upper handle down.
•
Remove the hairpin clips, pull outward on each side of the lower handle, and lift the sides of the
lower handle past the edges of the handle mounting brackets. Fold the lower handle forward.
Make sure not to bend or kink the power cord.
15